Bleed Resistant 5-Star Bright White CQ Plastisol Ink – For Cotton & 50/50 Blends

Bleed Resistant 5-Star Bright White CQ is our best-selling white — a super-bright, high-opacity white for 100% cotton and 50/50 cotton-poly blends with a remarkably soft hand and built-in bleed resistance that holds back polyester dye migration on blends. Print it direct or as a bright underbase; it's low-bleed with great stretch and cures at 320–350°F. CPSIA-compliant and phthalate-free, made in Hackensack, New Jersey.

Pint through 55 gallon. Heat cure. Made in the USA.

Also available in larger quantities — 30-gallon and 55-gallon drums; call 877-937-6400 for volume and discount pricing.

Features & benefits

• Super-bright, high-opacity white — clean, dense coverage that pops on darks
• Remarkably soft hand — a soft, comfortable print, not heavy or plasticky
• Bleed-resistant on blends — holds back polyester dye migration so the white stays bright
• Low-bleed & great stretch — flexes with the garment without cracking
• Direct print or underbase — a dependable bright base for colors on darks
• Our biggest seller — the shop-favorite white, pint to 55 gallon (plus 30 & 55 gallon drums)
• CPSIA-compliant & phthalate-free — safe for kids' apparel, made in the USA

Always run a test print first. Before any production run, print and fully cure a test on your exact garment and check opacity, hand, dye migration and wash-fastness. It's the best habit in the shop — if you're not sure on settings, call us at 877-937-6400 before you run the job.

What it prints on

• 100% cotton — full opacity, super-bright soft white
• 50/50 cotton/poly blends — bleed-resistant chemistry holds back dye migration from the polyester
• Runs as a bright flash underbase under colors on darks
• For dark or high-bleed 100% polyester, use our Athletic or Sport poly white

Printing & curing

• Mesh: 110–160 for maximum opacity; up to 200+ for a lighter deposit
• Squeegee: 65, 75 or 80 durometer — or a 70/90/70 triple durometer
• Flash: 240–260°F when used as an underbase; keep flash brief on blends to avoid triggering dye migration
• Cure: curing is a time-and-temperature process — bring the full ink film to 320–350°F (160–177°C); confirm with a temp gun or donut probe, not dryer air temp

Recommended companion products

• Nylon Bond 289 Additive — mix into this ink to bond prints to nylon and other slick synthetics (catalyst; stir in a small amount, limited pot life, always test first).
• Quick Flash Reducer — thins for easier printing.
• Soft Hand Base — soften the hand even further.
• UMX® Custom Color Match — send us your target color reference and we custom-mix the color for you (plastisol, solvent, UV & water-base).
• Cleanup: OPTI Wash 125 and OPTI Spot 303.

Safety, PPE & storage

• Wear nitrile gloves and safety glasses; avoid prolonged skin contact with uncured ink.
• Print with adequate ventilation; vent your dryer.
• Always stir before use.
• Storage & shelf life: keep sealed, out of sun. Shelf life 1–2 years. In high heat expect container expansion — open carefully. Do not freeze.
• Refer to the Safety Data Sheet before use.

Compliance

CPSIA compliant (16 CFR 1303 <90 ppm; CPSIA §101 <100 ppm total lead) — safe for children's apparel. Phthalate-free.

⚠ WARNING (California Proposition 65): This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Questions?

Total Ink Solutions
200 South Newman Street, Unit 4 & 5
Hackensack, NJ 07601
Phone:877-937-6400 · Fax: 201-487-9620
Email: sales@totalinksolutions.com