Free shipping over $250 on eligible items
Free shipping over $250 on eligible items
Total Ink Solutions
Pickup at our Hackensack, NJ location. Ready 30 minutes after ordering (in-stock items). Hours: Mon–Fri 8:00 AM–4:30 PM, Sat 8:00 AM–1:00 PM. You may not get a “ready” notification — just come in after 30 minutes. Pre-coated screens and custom color matches require 24 hours.
Ships at carrier rate. This item is excluded from free shipping — freight is calculated from its size and weight at checkout, or ask us for a delivered quote. Shipping policy
The CYBOR™ 24" Space Saver gives you a full 24" curing width in a compact footprint. It applies hot-melt adhesive powder to your printed film and melts it down so the transfer is ready to press — the same job a full tunnel dryer does, in a unit built for a shop that does not have a tunnel's worth of floor to give it.
Total Ink Solutions offers two ways to cure at 24":
| Unit | Choose it when |
|---|---|
| CYBOR™ 24" Space Saver | Floor space is tight, or you are adding a curing stage without rebuilding the shop around it. The lowest-cost route to a 24" cure. |
| 60CM DTF Tunnel Dryer | You are running continuously and want a full tunnel with balanced heating across the whole film width for commercial production volume. |
Print the film, apply the powder, cure it here, then heat press. Your curing width should match or exceed your printer width — undersizing this stage is the most common and most expensive mistake in a DTF setup.
CYBOR™ is Total Ink Solutions' own DTF equipment line, supported directly by Total Ink Solutions rather than through a third party.
Ships as freight, not parcel — a delivery appointment is arranged after the order.
Related supply
