Siser® EasyPatterns® Heat Transfer Vinyl – 24 Patterns – 12"

Siser® EasyPatterns® is pre-printed, pre-masked heat transfer vinyl. Cut it, weed it, press it — you get a full multi-color pattern in a single layer, with none of the weight or registration work that layering solid colors would cost you.

24 patterns, 12" x 1 yard.

Transfer tack included — every order ships with the transfer tack (application mask), so your pattern is ready to cut, weed, and press right out of the box.

Limited remaining stock. This is the original EasyPatterns® line. When it's gone, it's gone — if you have a repeat design running on one of these patterns, buy the yardage you need now.

Why it's worth the shelf space

• One layer, full pattern — no stacking three colors to get a plaid
• Pre-masked — carrier is already on, less to go wrong
• Transfer tack included — the application mask ships with every order
• Lighter hand — one layer sits softer on the garment than three
• CPSIA certified — approved for children's apparel

Specifications

• Composition: Polyurethane (PU)
• Backing: Pressure-sensitive
• Finish: Semi-gloss
• Thickness: 100 microns / 3.9 mils
• Width: 12" x 1 yard
• Application temp: 305°F / 150°C
• Pressure: Medium
• Time: 10–15 seconds
• Peel: Hot or cold
• Layering: Top layer only

Applies to

• 100% Cotton
• 100% Polyester
• Poly/Cotton Blends
• Leather

Cutter settings

• Cricut: Standard blade; setting Iron-On.
• Silhouette Cameo: Standard blade, 3; force 6; speed 8; material Heat Transfer, Smooth.
• Brother Scan N Cut: Standard blade, 2; cut speed 1; cut pressure 2.
• Roland GS/GX-24: 45° blade; 80–90 gf; speed 25–50 cm/s; offset .250.
• Graphtec: 45° blade; 9 gf; speed 25 cm/s; tool CB09U+0.
• Titan 2 & 3: 45°/60° blade; 60–65 gf; speed 300 mm/s.

Settings vary with blade condition and machine age. Always test cut first. Cut in mirror.

Application

Heat press: Cut in mirror, weed. Preheat the garment 2–3 seconds. Cover with a heat transfer cover sheet or multipurpose paper. Press at 305°F (150°C), medium pressure, 10–15 seconds. Peel hot or cold.

Home iron: Set dial between Cotton and Linen. Cover the design. Press with medium/firm pressure for 15 seconds on a flat, hard surface — not an ironing board. If any part lifts, cover and re-press 10 seconds. Peel hot or cold.

Laundering

• Wait 24 hours before the first wash
• Machine wash cold with mild detergent
• Dry on normal setting
• Do not dry clean · Do not bleach

Layering note

EasyPatterns® can be combined with other Siser® HTV — but it must always be the top layer. Nothing presses on top of it.

Looking for something else?

• Solid colors, 55 of them → Siser® EasyWeed®
• Suede texture → Siser® StripFlock® Pro
• Sparkle → Siser® Glitter

Questions?

Total Ink Solutions
200 South Newman Street, Unit 4 & 5
Hackensack, NJ 07601
Phone:877-937-6400 · Fax: 201-487-9620
Email: sales@totalinksolutions.com

---

At-a-Glance Specifications

Peel	Hot or cold
Pressure	Medium
Temperature	305°F (150°C)
Transfer Time	10–15 seconds
Substrates	Cotton, Polyester, Poly/Cotton Blends

Resources

Siser HTV Application Instructions → Siser Brochure & Catalog →

Watch & Learn

How to Apply EasyPatterns® by Siser — Siser North America

How Much Pressure When Heat Applying? — Siser North America