General Purpose White Plastisol Ink – 100% Cotton

General Purpose White Plastisol Ink is a high-opacity, soft-hand white optimized for 100% cotton — clean coverage on dark garments and a bright, dependable flash underbase. CPSIA-compliant and phthalate-free, made in Hackensack, New Jersey.

📄 TDS — Technical Data Sheet (PDF)
🧪 SDS — Safety Data Sheet (PDF)

Pint through 55 gallon. Heat cure. Made in the USA.

Also available in larger quantities — 30-gallon and 55-gallon drums; call 877-937-6400 for volume and discount pricing.

Features & benefits

• High opacity — clean, solid white coverage on dark 100% cotton
• Soft hand — smooth white print that isn't heavy
• Dependable flash underbase — bright base for colors on darks
• Creamy & print-ready — smooth lay-down on manual or automatic presses
• Pint to 55 gallon — stock sizes plus drums for production shops
• CPSIA-compliant & phthalate-free — safe for kids' apparel, made in the USA

Always run a test print first. Before any production run, print and fully cure a test on your exact garment and check opacity, hand and wash-fastness. It's the best habit in the shop — if you're not sure on settings, call us at 877-937-6400 before you run the job.

What it prints on

• 100% cotton — its sweet spot: full opacity, soft hand
• Runs as a flash underbase under bright colors on dark cotton
• Cotton-rich blends print well; test for dye migration on higher-poly fabrics

Printing & curing

• Mesh: 110–160 for a high-opacity deposit; up to 200+ for a lighter print
• Squeegee: 65, 75 or 80 durometer — or a 70/90/70 triple durometer
• Flash: 240–260°F when used as an underbase
• Cure: full ink film to 330–350°F (166–177°C) — confirm with a temp gun or donut probe
• Stir before use

Recommended companion products

• Nylon Bond 289 Additive — mix into this ink to bond prints to nylon and other slick synthetics (catalyst; stir in a small amount, limited pot life, always test first).
• Quick Flash Reducer — thins for easier printing.
• Soft Hand Base — softer hand feel.
• UMX® Custom Color Match — send us your target color reference and we custom-mix the color for you (plastisol, solvent, UV & water-base).
• Cleanup: OPTI Wash 125 and OPTI Spot 303.

Safety, PPE & storage

• Wear nitrile gloves and safety glasses; avoid prolonged skin contact with uncured ink.
• Print with adequate ventilation; vent your dryer.
• Always stir before use.
• Storage & shelf life: keep sealed, out of sun. Shelf life 1–2 years; low-cure and all-polyester inks store at 60–80°F. In high heat expect container expansion — open carefully. Do not freeze.
• Refer to the Safety Data Sheet (SDS) before use — download the PFGP SDS (PDF).

Compliance

CPSIA compliant (16 CFR 1303 <90 ppm; CPSIA §101 <100 ppm total lead) — safe for children's apparel. Phthalate-free.

⚠ WARNING (California Proposition 65): This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Questions?

Total Ink Solutions
200 South Newman Street, Unit 4 & 5
Hackensack, NJ 07601
Phone:877-937-6400 · Fax: 201-487-9620
Email: sales@totalinksolutions.com