Glow in the Dark Plastisol Ink – Green & Aqua – 4-Hour Glow

Glow in the Dark Plastisol Ink charges under light and glows in the dark for up to 4 hours in green and aqua. It prints and cures like a standard cotton ink at 330–350°F for a soft hand and bright daytime color that switches to a luminous nighttime glow. CPSIA-compliant and phthalate-free, made in Hackensack, New Jersey.

2 glow colors (green & aqua). Pint, quart, gallon and 5 gallon. Heat cure. Made in the USA.

Also available in larger quantities — 30-gallon and 55-gallon drums; call 877-937-6400 for volume and discount pricing.

Features & benefits

• 4-hour glow — charges under light, glows green or aqua in the dark
• Daytime color, nighttime glow — works as a normal print in the light
• Soft hand — standard cotton cure at 330–350°F
• CPSIA-compliant & phthalate-free — made in the USA

Always run a test print first. Before any production run, print and fully cure a test on your exact garment and check the effect, opacity, hand and wash-fastness. It's the best habit in the shop — if you're not sure on settings, call us at 877-937-6400 before you run the job.

What it prints on

• 100% cotton — soft hand, bright daytime color and a strong glow
• Cotton-rich blends — print well; test for dye migration on higher-poly fabrics
• For the strongest glow — print over a white base and lay the glow ink down heavy

Printing & curing

• Mesh: 60–110 to lay down enough phosphor for a strong glow
• Squeegee: 65, 75 or 80 durometer — or a 70/90/70 triple durometer
• Flash: 240–260°F between colors
• Cure: curing is a time-and-temperature process — bring the full ink film to 330–350°F (166–177°C); confirm with a temp gun or donut probe, not dryer air temp

Recommended companion products

• Nylon Bond 289 Additive — mix into this ink to bond prints to nylon and other slick synthetics (catalyst; stir in a small amount, limited pot life, always test first).
• Quick Flash Reducer — thins for easier printing.
• Soft Hand Base — softer hand feel.
• UMX® Custom Color Match — send us your target color reference and we custom-mix the color for you (plastisol, solvent, UV & water-base).
• Cleanup: OPTI Wash 125 and OPTI Spot 303.

Safety, PPE & storage

• Wear nitrile gloves and safety glasses; avoid prolonged skin contact with uncured ink.
• Print with adequate ventilation; vent your dryer.
• Always stir before use.
• Storage & shelf life: keep sealed, out of sun. Shelf life 1–2 years. In high heat expect container expansion — open carefully. Do not freeze.
• Refer to the Safety Data Sheet before use.

Compliance

CPSIA compliant (16 CFR 1303 <90 ppm; CPSIA §101 <100 ppm total lead) — safe for children's apparel. Phthalate-free.

⚠ WARNING (California Proposition 65): This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Questions?

Total Ink Solutions
200 South Newman Street, Unit 4 & 5
Hackensack, NJ 07601
Phone:877-937-6400 · Fax: 201-487-9620
Email: sales@totalinksolutions.com