Powderless White Plastisol Ink – For 50/50 Cotton-Poly Blends

Powderless White Plastisol Transfer Ink lets you build screen-printed heat transfers with no adhesive powder — print your white, gel it, and heat-press onto the garment, skipping the powder step entirely. A high-opacity white for cotton, polyester and 50/50 blends, it cures at 300–310°F. CPSIA-compliant and phthalate-free, made in Hackensack, New Jersey.

Pint, quart, gallon and 5 gallon. Heat cure. Made in the USA.

Also available in larger quantities — 30-gallon and 55-gallon drums; call 877-937-6400 for volume and discount pricing.

Features & benefits

• No adhesive powder needed — print, gel, press; skip the powder step
• High-opacity transfer white — bright, dense base for your transfer
• Cotton, polyester & 50/50 blends — versatile heat-press application
• Cures 300–310°F — low-bleed
• CPSIA-compliant & phthalate-free — made in the USA

Always run a test print first. Before any production run, print and fully cure a test on your exact garment and check opacity, hand and wash-fastness. It's the best habit in the shop — if you're not sure on settings, call us at 877-937-6400 before you run the job.

What it prints on

• Screen-printed heat transfers — print onto transfer paper, gel, and press — no powder
• Cotton, polyester & 50/50 blend garments — the finished transfer presses onto virtually any garment

Printing & curing

• Mesh: 110–160 for a bright, high-opacity transfer
• Squeegee: 65, 75 or 80 durometer — or a 70/90/70 triple durometer
• Gel (not full cure): transfers are gelled, not fully cured, before pressing — hold the ink at a gel temperature per your transfer paper, then heat-press to finish
• Final cure: when heat-pressed to the garment, bring the full ink film to 300–310°F (150–154°C); confirm with a temp gun or donut probe

Recommended companion products

• Nylon Bond 289 Additive — mix into this ink to bond prints to nylon and other slick synthetics (catalyst; stir in a small amount, limited pot life, always test first).
• Quick Flash Reducer — thins for easier printing.
• Soft Hand Base — softer hand feel.
• UMX® Custom Color Match — send us your target color reference and we custom-mix the color for you (plastisol, solvent, UV & water-base).
• Cleanup: OPTI Wash 125 and OPTI Spot 303.

Safety, PPE & storage

• Wear nitrile gloves and safety glasses; avoid prolonged skin contact with uncured ink.
• Print with adequate ventilation; vent your dryer.
• Always stir before use.
• Storage & shelf life: keep sealed, out of sun. Shelf life 1–2 years. In high heat expect container expansion — open carefully. Do not freeze.
• Refer to the Safety Data Sheet before use.

Compliance

CPSIA compliant (16 CFR 1303 <90 ppm; CPSIA §101 <100 ppm total lead) — safe for children's apparel. Phthalate-free.

⚠ WARNING (California Proposition 65): This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Questions?

Total Ink Solutions
200 South Newman Street, Unit 4 & 5
Hackensack, NJ 07601
Phone:877-937-6400 · Fax: 201-487-9620
Email: sales@totalinksolutions.com