Saati Textil PV One Step – Pre-Sensitized Photopolymer Emulsion

Saati Textil PV One Step is a pre-sensitized, one-part photopolymer emulsion — no diazo to mix, no waiting. Scoop it straight from the bucket, coat, dry, and expose. It's built for textile screen printing and holds sharp, clean stencils shot after shot.

Why printers reach for it

• Ready to use: Pre-sensitized SBQ photopolymer — open, coat, done. No diazo activation and no short pot life.
• Fast exposure: High photo-speed for quick, forgiving burns and faster screen turnaround.
• High solids: Builds a smooth, sharp stencil that holds fine lines and halftones.
• Ink compatibility: Strong resistance for plastisol; add a hardener and post-expose for water-based and discharge work.

How to use

Coat 1/1 or 2/1 (extra passes on the print side) onto a clean, degreased screen, dry flat in the dark, and run an exposure test to dial in your unit. Reclaims cleanly with emulsion remover.

Sizes

Available in Quart, Gallon, and 5 Gallon.

Pairs well with

Coat it with a scoop coater, then reclaim and degrease with Franmar screen chemicals. Browse all emulsion & exposure supplies.