UMX® Mixing White – Custom Color Mixing Base

$29.99

Pickup at our Hackensack, NJ location. Ready 30 minutes after ordering (in-stock items). Hours: Mon–Fri 8:00 AM–4:30 PM, Sat 8:00 AM–1:00 PM. You may not get a “ready” notification — just come in after 30 minutes. Pre-coated screens and custom color matches require 24 hours.

SKU: PFMB-PT
Size: Pint

UMX® Mixing White (Custom Color Mixing Base) is the mixing base of our UMX (Ultimate Mixing System) — combine it with the 18 UMX mixing colors to hit lighter tints and complete every target color reference recipe by weight. it cures at 320–350°F. CPSIA-compliant and phthalate-free, made in Hackensack, New Jersey.

Mixing base. Available in multiple sizes. Heat cure. Made in the USA.

Also available in larger quantities — 30-gallon and 55-gallon drums; call 877-937-6400 for volume and discount pricing.

Features & benefits

The mixing base — lightens tints and completes UMX® mixing recipes
system — verified under D50 lighting
Mix by weight — free software at umxsystem.com
Consistent, repeatable color
CPSIA-compliant & phthalate-free — made in the USA

Always run a test print first. Before any production run, print and fully cure a test on your exact garment and check opacity, hand and wash-fastness. It's the best habit in the shop — if you're not sure on settings, call us at 877-937-6400 before you run the job.

How the system works

Pull your target color reference recipe from the free UMX software.
Weigh the mixing white with the 18 UMX mixing colors per the recipe.
Print, cure, and get a verified, repeatable spot color.

Printing & curing

Mesh: 110–305 depending on the print
Squeegee: 65, 75 or 80 durometer — or a 70/90/70 triple durometer
Flash: 240–260°F between colors
Cure: curing is a time-and-temperature process — bring the full ink film to 320–350°F (160–177°C); confirm with a temp gun or donut probe, not dryer air temp

Recommended companion products

Nylon Bond 289 Additive — mix into this ink to bond prints to nylon and other slick synthetics (catalyst; stir in a small amount, limited pot life, always test first).
Quick Flash Reducer — thins for easier printing.
Soft Hand Base — softer hand feel.
UMX® Mixing Colors / UMX® Mixing Kit.
Cleanup: OPTI Wash 125 and OPTI Spot 303.

Safety, PPE & storage

Wear nitrile gloves and safety glasses; avoid prolonged skin contact with uncured ink.
Print with adequate ventilation; vent your dryer.
Always stir before use.
Storage & shelf life: keep sealed, out of sun. Shelf life 1–2 years. In high heat expect container expansion — open carefully. Do not freeze.
Refer to the Safety Data Sheet before use.

Compliance

CPSIA compliant (16 CFR 1303 <90 ppm; CPSIA §101 <100 ppm total lead) — safe for children's apparel. Phthalate-free.

⚠ WARNING (California Proposition 65): This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Questions?

Total Ink Solutions
200 South Newman Street, Unit 4 & 5
Hackensack, NJ 07601
Phone:877-937-6400 · Fax: 201-487-9620
Email: sales@totalinksolutions.com