80000 Series Coroplast Screen Printing Ink – Air Dry

80000 Series Coroplast Screen Printing Ink is a solvent-based, air-dry industrial ink formulated specifically for Coroplast and untreated corrugated plastic (PE/PP) sign board. It bonds to untreated polyethylene and polypropylene fluted stock that most inks won't hold, making it the go-to for yard signs and short-term outdoor signage.

⚠ Industrial use only. This is an industrial solvent ink for sign board and industrial products. It is not a textile or garment ink and is not intended for printing on apparel or for skin contact.

Air dry. Quart, gallon and 5 gallon. Made in Hackensack, New Jersey.

Substrates & end uses — what the 80000 Series is for

Purpose-built for untreated fluted plastic sign stock:

• Coroplast® / corrugated plastic board
• Untreated polyethylene (PE)
• Untreated polypropylene (PP)

The standard choice for yard signs, election and real-estate signs, point-of-purchase and short-term outdoor signage on fluted board.

Recommended companion products

Match your 80000 Series ink with the correct thinner and cleaner. Add modifiers by weight and always test on your exact substrate first.

• OPTI 910 Slow Thinner — the standard reducer for this series. Reduce 5–10% by weight for smooth flow and controlled drying.
• OPTI 900 Fast Thinner / Wash-Up — speeds drying and doubles as a wash-up.
• OPTI 902 Lacquer Wash-Up or OPTI 925 Mild Lacquer Wash-Up — clean screens, squeegees and tools after printing.

Which solvent series do I need?

• Vacuum-form / multi-purpose plastics — 10000 Series
• Coroplast / corrugated plastic signs — 80000 Series (you're here)
• Pressure-sensitive vinyl, gloss — 40000 Series
• Pressure-sensitive vinyl, matte — 43000 Series
• Metal, glass, ceramic, hard non-porous — 20000 Series (epoxy)
• Polyester film, nameplates, overlays — 76000 Series
• Flexible / treated plastics, durable outdoor — 66000 Series
• Industrial maintenance topcoat — 30000 Series

Adhesion on solvent inks is substrate-specific. Always run an adhesion test on your exact sign board before a production run.

Specifications

• Type: solvent-based sign ink · air dry · bonds to untreated PE/PP
• Substrate: Coroplast / corrugated plastic, untreated polyethylene and polypropylene board
• Mesh: 230–305 monofilament polyester, depending on detail
• Coverage: approx. 1,000 sq ft per gallon at 250 mesh
• Reduction: 5–10% with OPTI 910 Slow Thinner (or OPTI 900 fast)
• Drying: air dry ~30 minutes; jet-dry 20–30 seconds at 135–180°F (37–83°C)
• Cleanup: OPTI 900 / OPTI 902 / OPTI 925 wash-up
• Storage: cool, dry, away from ignition; keep sealed
• Sizes: Quart · Gallon · 5 Gallon

Custom color matching

Our UMX (Ultimate Mixing System) matches any target color in solvent, UV, plastisol or water-based ink — verified under D50 lighting, standard turnaround 48–72 hours. Free software at umxsystem.com.

Safety, PPE & OSHA compliance

Flammable solvent-based product — handle per the OSHA Hazard Communication Standard (29 CFR 1910.1200); a GHS Safety Data Sheet ships with every order and must be kept accessible to employees.

• Gloves — chemical-resistant nitrile (not latex).
• Safety glasses — to protect against splashes.
• Mask — a solvent/organic-vapor respirator mask when ventilation can't keep vapors down (not a dust mask).
• Storage — keep sealed and upright in a cool, dry, well-ventilated place away from heat, sparks, flame and sun; ground containers when transferring.

See the product SDS for the GHS signal word, flash point and HMIS ratings before use.

Compliance

CPSIA — Lead content. This series has been tested and complies with CPSIA lead limits: 16 CFR Part 1303 (lead in paint & surface coatings) <90 ppm; CPSIA §101 (total lead in substrates) <100 ppm.

This is an industrial solvent ink intended for industrial use only. No Proposition 65 apparel determination applies. Refer to the Safety Data Sheet for full hazard and handling information.

Questions?

Total Ink Solutions
200 South Newman Street, Unit 4 & 5
Hackensack, NJ 07601
Phone:877-937-6400 · Fax: 201-487-9620
Email: sales@totalinksolutions.com