30000 Series Industrial Maintenance Topcoat

30000 Series Industrial Maintenance Topcoat is a solvent-based, air-dry enamel ink built for durable industrial identification and coating — equipment panels, control faces, metal parts and industrial products that have to survive handling, chemicals and time. It dries to a hard, abrasion- and chemical-resistant film.

⚠ Industrial use only. This is an industrial solvent enamel for equipment and industrial products. It is not a textile or garment ink and is not intended for printing on apparel or for skin contact.

35 colors. Quart, gallon and 5 gallon. Air dry. Made in Hackensack, New Jersey.

Best uses for the 30000 Series

• Industrial equipment panels, faceplates and control surfaces
• Metal identification and durable industrial marking
• Applications needing a hard, chemical- and abrasion-resistant topcoat

Which solvent series do I need?

Substrate	Series
Coroplast / corrugated plastic signs	80000
Pressure-sensitive vinyl — gloss	40000
Pressure-sensitive vinyl — matte	43000
Metal, glass, ceramic, hard non-porous	20000 (epoxy)
Polyester film, nameplates, overlays	76000
Flexible / treated plastics, durable outdoor	66000
Vacuum-form / multi-purpose plastics	10000
Durable industrial maintenance topcoat	30000 (you're here)

Adhesion on solvent inks is substrate-specific. Always run an adhesion and solvent-resistance test on your exact material before a production run.

Specifications

Type	Solvent-based enamel · air dry
Use	Durable industrial topcoat / identification
Mesh	230–355 depending on detail
Thinner	Use the matched 30000-compatible thinner / retarder
Drying	Air dry; full hardness develops over time
Cleanup	Compatible solvent wash-up
Storage	Cool, dry, away from ignition. Keep sealed.
Sizes	Quart · Gallon · 5 Gallon

Custom color matching

We are a Pantone® certified company. Our UMX (Ultimate Mixing System) matches any Pantone® color in solvent, UV, plastisol or water-based ink — verified under D50 lighting, standard turnaround 48–72 hours. Free software at umxsystem.com.

Safety & handling

• Industrial use only — not for apparel, skin contact, or consumer textile use
• Flammable solvent-based ink — keep away from heat, sparks and open flame
• Use only with adequate ventilation or local exhaust; wear appropriate PPE
• Avoid skin and eye contact; wash thoroughly after handling
• Store and dispose of in accordance with local, state and federal regulations
• Refer to the Safety Data Sheet before use

Compliance

CPSIA — Lead content
This series has been tested and complies with CPSIA lead limits:

• 16 CFR Part 1303 — Lead in Paint & Surface Coatings: <90 ppm
• CPSIA §101 — Total Lead in Substrates: <100 ppm

This is an industrial solvent enamel intended for industrial use only. No Proposition 65 apparel determination applies. Refer to the Safety Data Sheet for full hazard and handling information.

Questions?

Total Ink Solutions
200 South Newman Street, Unit 4 & 5
Hackensack, NJ 07601
Phone: 201-487-9600 · Fax: 201-487-9620
Email: sales@totalinksolutions.com