Water-Based Fluorescent Ink – 9 Neon Colors

Water-Based Fluorescent Ink (WBFL Series) prints high-visibility neons that pop under natural light and glow under blacklight — with the soft, breathable hand only water-based gives you. Phthalate-free and built for fashion, festival and streetwear work where the color is the whole point.

12 fluorescent colors. Pint, quart, gallon and 5 gallon. Made in Hackensack, New Jersey.

Best for

• Streetwear, festival and nightlife apparel — reacts under blacklight
• 100% cotton and cotton/poly blends
• High-impact neon graphics where a soft hand still matters

How to run it

Type	Water-based fluorescent · phthalate free
Substrate	100% cotton · cotton/poly blends
Underbase	Print over a white underbase on dark garments for maximum neon pop
Mesh	110–160
Flash	250°F (121°C) for 3–5 seconds
Cure	320–350°F (160–177°C) — all moisture must evaporate before the ink is fully cured
On press	Keep it moving — water-based dries in the mesh if the press stops. Use a retarder for long runs.
Cleanup	Water and mild soap
Storage	65–90°F, sealed, out of direct sun. Do not freeze.
Sizes	Pint · Quart · Gallon · 5 Gallon

Fluorescent pigments are bright but not UV-stable long-term — neon colors will fade with prolonged sun exposure faster than standard colors. Perfect for fashion and event wear; not the pick for long-term outdoor signage.

Need a color we do not stock?

Our proprietary UMX (Ultimate Mixing System) matches any target color — in water-based, plastisol, solvent or UV ink. Standard turnaround 48–72 hours under D50 lighting. Free software: umxsystem.com.

Safety & handling

• Keep out of reach of children
• Avoid prolonged skin contact — wash with soap and water
• Use with adequate ventilation, particularly at the dryer
• Refer to the Safety Data Sheet before use

Questions?

Total Ink Solutions LLC
200 South Newman Street, Unit 4 & 5
Hackensack, NJ 07601
Phone:877-937-6400
Email: sales@totalink.com