WFX Color Match Plastisol Ink – Gallon – For Cotton, Polyester & Blends

$99.99

Pickup at our Hackensack, NJ location. Ready 30 minutes after ordering (in-stock items). Hours: Mon–Fri 8:00 AM–4:30 PM, Sat 8:00 AM–1:00 PM. You may not get a “ready” notification — just come in after 30 minutes. Pre-coated screens and custom color matches require 24 hours.

SKU: PFAP-WFX-Winter Blue-1G
Options: Winter Blue

Options

WFX Color Match Plastisol Ink (Gallon) is our made-to-order custom color-match ink by the gallon — send us your target color reference and we mix your exact color and ship it ready to print. For cotton, polyester and blends, it cures at 320–350°F. CPSIA-compliant and phthalate-free, made in Hackensack, New Jersey.

Made-to-order. Gallon. Heat cure. Made in the USA.

Also available in larger quantities — 30-gallon and 55-gallon drums; call 877-937-6400 for volume and discount pricing.

Features & benefits

Made-to-order custom match — send your target color reference, we mix your exact color
Ready to print — no in-house mixing required
Cotton, polyester & blends — bleed-resistant on blends
Cures 320–350°F
CPSIA-compliant & phthalate-free — made in the USA

Always run a test print first. Before any production run, print and fully cure a test on your exact garment and check opacity, hand and wash-fastness. It's the best habit in the shop — if you're not sure on settings, call us at 877-937-6400 before you run the job.

How it works

Send us your target color reference number or a target sample.
We mix and verify your exact color under D50 lighting.
It ships ready to print — consistent from bucket to bucket.

Printing & curing

Mesh: 110–230 depending on the print
Squeegee: 65, 75 or 80 durometer — or a 70/90/70 triple durometer
Flash: 240–260°F between colors
Cure: curing is a time-and-temperature process — bring the full ink film to 320–350°F (160–177°C); confirm with a temp gun or donut probe, not dryer air temp

Recommended companion products

Nylon Bond 289 Additive — mix into this ink to bond prints to nylon and other slick synthetics (catalyst; stir in a small amount, limited pot life, always test first).
Quick Flash Reducer — thins for easier printing.
Soft Hand Base — softer hand feel.
UMX® Custom Color Match — send us your target color reference and we custom-mix the color for you (plastisol, solvent, UV & water-base).
Cleanup: OPTI Wash 125 and OPTI Spot 303.

Safety, PPE & storage

Wear nitrile gloves and safety glasses; avoid prolonged skin contact with uncured ink.
Print with adequate ventilation; vent your dryer.
Always stir before use.
Storage & shelf life: keep sealed, out of sun. Shelf life 1–2 years. In high heat expect container expansion — open carefully. Do not freeze.
Refer to the Safety Data Sheet before use.

Compliance

CPSIA compliant (16 CFR 1303 <90 ppm; CPSIA §101 <100 ppm total lead) — safe for children's apparel. Phthalate-free.

⚠ WARNING (California Proposition 65): This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Questions?

Total Ink Solutions
200 South Newman Street, Unit 4 & 5
Hackensack, NJ 07601
Phone:877-937-6400 · Fax: 201-487-9620
Email: sales@totalinksolutions.com